CCSone
1 月 2, 2026
VIS-G20 /VIS-G30
VIS-G20
Application :Rotogravure / Flexo / Reprint / Varnishes
VIS-G30
Application :Solvent /Water based Laminator or Vanishes coating
The VIS-G20 is a system for the regulation of the viscosity of the solvent-based inks and the VIS-G30 is for the solvent based adhesive.
The measurement of the viscosity takes place thanks to a vibration sensor immersed in the liquid to be analyzed, without moving parts.
Brand : GAMARelated products
Measurement is done thanks to a vibration sensor, No consumable parts requiring regular replacement.
Automatic cleaning of the viscometer performed at the end of work, at the same time washing the inking circuit.
From the analysis extrapolates the viscosity in seconds (cup ZAHN, FORD, …) and by the correction valve maintains the management based on the reference set.
The automatic solvent dosing system complies with CE standards and reduces solvent evaporation by up to 40%, providing a safer working environment for operators.
Please contact us for more application
**PH control Control developed for the control of pH for any material requires a monitoring of the same. This control can be found stand alone or integrated in the viscosity control.
**Cooling control The ink temperature system measured by a temperature sensor, which sends the measurement to the electronic control, which operates with reference set by the operator.
The ink temperature is measured by a temperature sensor, which transmits the data to the electronic controller. The controller regulates the system based on the setpoint defined by the operator.
PH Control
Control developed for the control of pH for any material requires a monitoring of the same. This control can be found stand alone or integrated in the viscosity control.